Nowadays, there are so many products of conversion kit for refrigerator in the market and you are wondering to choose a best one.You have searched for conversion kit for refrigerator in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings conversion kit for refrigerator which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
897 reviews analysed
1. Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit with 5 lb. Co2 Tank
Feature
- DUAL GAUGE REGULATOR: This Kegco 542-2 Commercial Grade Double Gauge Regulator has a y-splitter and two independent shut-off valves that let you dispense up to two kegs at the same pressure. It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.
- LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L D System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length.
- INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. . These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear.
Description
With Kegco’s Standard Dual Keg Kegerator Conversion Kit, do-it-yourself beer lovers will have all of the tools they need to convert a refrigerator or freezer into a two product draft beer dispenser that has all of the exciting features that professionals love. Included in this kit are high quality and high performance parts like a commercial-grade dual gauge regulator that allows you to monitor both the CO2 pressure in your keg and the CO2 volume in your tank, and lever handle keg couplers that are more durable and long-lasting than wing handle couplers. Once the conversion process is complete, your new kegerator will be able to run 2 full-size kegs, 2 pony kegs, 2 five gallon kegs, or any combination you choose, depending on the capacity of the refrigerator or freezer that you have converted.
2. BACOENG Double Faucet Door Mount Kegerator Refrigerator Conversion Kit No Tank
Feature
- 1. DUAL GAUGE REGULATOR: It comes with an appropriate pressure dial that features the style of a knob for regulating pressure. With a weight of 3 pounds, the unit comes with rubber covers for protective purposes. You can use the gauge to know the pressure outside and inside the CO2 tank –you will not have to be worried that your gas might run out. It also has a shutoff valve that features a built-in spring for preventing the backflow of beer. Pressure Relief Valve Releases at 45PSI.
- 2. LEVER HANDLE KEG COUPLER: This refers to a D System Keg Coupler that has a strong construction made of nickel-plated forged brass. The probe, on the other hand, is made of stainless steel. The unit can be used alongside any domestic brand American D system Sankey kegs. It features an easy-to-use design, where you only need to pull the lever handle out and down, in that order, to couple the keg. The coupling of the keg is quite convenient with the availability of a 55-psi pressure relief valve
- 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you’ll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8″ long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1″ hole.
- 4. METAL BEER FAUCET WRENCH: You need the ideal wrench spanner for loosening or tightening shrank collars easily and quickly without the worry that you will scratch your faucets, and the standard metal beer faucet wrench is just the right tool. The all-mental sturdiness of this wrench makes it quite durable as well as ideal to handle any tightening or loosening needs. It is 5-1/4″ in length, which makes it easy to use on any surface.
- 5. STANDARD METAL BEER FAUCET WRENCH: You need the ideal wrench spanner for loosening or tightening shrank collars easily and quickly without the worry that you will scratch your faucets, and the standard metal beer faucet wrench is just the right tool. The all-mental sturdiness of this wrench makes it quite durable as well as ideal to handle any tightening or loosening needs. It is 5-1/4″ in length, which makes it easy to use on any surface.
3. Bev Rite CRCK101 Premium Refrigerator Conversion Kit Door Mount Keg Tap Beer Single Line, without CO2 Tank Clear
Description
Premium refrigerator conversion kit door Mount keg tap beer single line, without CO2 tank. Everything is included right down to the last hose clamp.
4. Kegco Standard Tower Kegerator Conversion Kit with 5 lb. Co2 Tank – STCK-5T
Feature
- Single Faucet 3″ Diameter Polished Stainless Steel Draft Tower
- Commercial Double Gauge Co2 Regulator & New Aluminum 5lb Co2 Tank
- American “D” System Sankey Lever Handle Tap Coupler
- 5 Feet of 3/16″ ID Beer Line Assembly
- Note: Beverage Factory is the only Authorized Reseller of Kegco Kegerator Kits.
Description
This Standard Tower Conversion kit is the perfect solution for those who are converting a compact refrigerator or converting a freezer into a kegerator. This kit comes with brand new, high quality draft beer components and contains everything you will need to successfully convert your compact refrigerator/freezer into a kegerator at great savings. Note: Beverage Factory is the only Authorized Reseller of Kegco Kegerator Kits (Other sellers are selling inferior kits that are not Warrantied or Quality Assured Kegco Quality.
5. NORCOLD INC Norcolder SCQT4408F-I – Refrigerator Conversion Kit – 40-Watt AC/DC
Feature
- From Ice Box to Electric Refrigerator: Nor colder SCQT4408F-I is a complete conversion kit that allows you to upgrade an up to 3 cubic foot ice box and transform it into an automatic electric refrigerator.
- Minimum Heat Transfer: In order to minimize heat transfer between the compressor/ power supply and the evaporator plate, SCQT4408F-I features pre-charged copper tubing.
- Auto-switch Between AC and DC: In case of power failure, the built-in relay switches from AC to DC and goes back to AC when available.
- 6-cubic foot Conversion Kit Available: For larger ice boxes, SCQT4408F-L allows you to convert an up to 6-cubic foot insulated ice box into an electric refrigerator.
Description
Nor colder SCQT4408F-I is a complete conversion kit that allows you to economically upgrade any ice box and transform it into an automatic electric refrigerator. The easy-to-use conversion kit allows you to convert up to a 3-cubic foot insulated ice box and comes with an I-shaped evaporator plate. In order to minimize heat transfer between the compressor/ power supply and the evaporator plate, SCQT4408F-I features pre-charged copper tubing. The kit features manual controls with 5 settings for adjusting the temperature inside the ice box. In case of power failure, the built-in relay switches from AC to DC and goes back to AC when available. Nor colder SCQT4408F is available in 2 versions: – SCQT4408F-I: This model is designed to convert an up to 3-cubic foot insulated ice box. The conversion kit comes with an I-shaped evaporator plate. – SCQT4408F-L: This model is designed to convert an up to 6-cubic foot insulated ice box. The conversion kit comes with an L-shaped evaporator plate pressor dimensions: – Height: 14. 125 in = 35. 88 cm- Width: 9. 5 in = 24. 13 cm- Depth: 5. 87 in = 14. 91 cm.
6. 3 Faucet Refrigerator Keg Kit Commerical Tap, Taprite Regulator, by Kegconnection
Feature
- 3- 4 1/8″ Metal Shanks with Chrome Faucets and Faucet handles.
- Double Gauge Regulator, Made in the USA by TAPRITE (BONUS: Kegconnection adds an Additional ONE year warranty to Taprite regulators.)
- 3 Way Air Distributor with independent check valved shutoffs.
- 3 American “D” Keg Couplers with a Deluxe Faucet Wrench
- Shipping rate is for the Continental US ONLY
Description
Kegconnection offers this Refrigerator Conversion Kit, 3 taps for three Sanke tap kegs(Standard Commercial Beer Tap). Fully Assembled! Made in the USA Regulator(BONUS: Kegconnection adds an Additional ONE year warranty to Taprite regulators.)p is attached to an air manifold with Check Valves.(This is important because it keeps beer from flowing between kegs, this is an issue with kits built with TEE system) The manifold system will allow you to install and run your gas inside or outside of your fridge. When installing outside you will only need to drill one hole! This kit is designed to give you everything you need to dispense commercial beer from a Sanke tap (95% of beers on the market use this tap) except for the refrigerator. Very simple to set up, the hoses and pieces are already assembled!!! The Kit Includes: 2 gauge CO2 American made Taprite Regulator with 3 way air manifold, 3 American “D” Beer Taps,3-4 1/8″ standard Shanks for Refrigerator with line attached, 3-standard chrome metal faucets that screw directly into Shanks, faucet handles and stainless oetiker clamps. Also includes a Deluxe faucet wrench. Our kits come fully assembled! Shipping rate is for the Continental US ONLY
7. Refrigerator or Freezer Thermostat (Temperature Controller)
Description
With the thermostat control you can turn any freezer or refrigerator into a sophisticated lagering device and more accurately control the temperature of your ales. Simply place the temperature probe into the freezer, plug the thermostat into the outlet and then your freezer into the Control. This thermostat has a range from 30 degrees F to 80 degrees F.
8. Johnson Controls A19AAT-2C Freezer Temperature Controller (D132)
Description
Use this handy controller to regulate the temperature in your freezer between 20 – 80F . Great for turning a chest freezer into a keg refrigerator. Strictly a mechanical thermostat for cooling only, it is simple to use and economical. It operates with a gas filled probe on a 6-foot capillary tube. When the gas contracts or expands in the probe, it triggers a mechanical device inside the control which turns the power on or off. There is no probe temperature readout on the dial, so keeping a thermometer inside the refrigerator is highly recommended to keep track of the actual temperature. On most refrigerators, the controller will allow a usable range of 37 to 80 F, while on freezers, the controller will be able to reach its full 20 to 80 F range. Features: Made of stainless steel. Adjustable with the turn of a knob. No drilling necessary. Plug unit into wall and then run the sensor into your freezer. Male and female plug in one. Specs: Temperature dimensions: 4 3/8″ H x 2 1/8″ W x 1 1/2″ D. Cord dimensions: 6′. Remote sensor bulb: 5 1/2″W. Remote sensor bulb capillary tube: 6′. Temperature range: 20 – 80F. Voltage: 120 VAC.
9. R12 to R134A Conversion Kit BPV-31 Bullet Piercing Tap Valve R134A Refrigerant Opening Valve 8401 Can Tap 6015 6014 Refrigerant Vacuum Pump Adapter, Retrofit Valve Convert Adapter for A/C Refrigerant
Feature
- Package includes: you will receive 1 piece of low side port and 1 piece high side port (with dust caps), 1 piece R134a refrigerant opening valve, 1 piece 6014 refrigerant vacuum pump adapter and 1 piece 6015 refrigerant tank vacuum pump adapter and 2 pieces BPV-31 bullet piercing tap valves, totally 7 pieces, can meet your needs
- BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
- Compatible with: compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
- Easy installation: only a hex key wrench (included)
- Its compact design only requires a 2 inch clearance area for installation and use
- R134a refrigerant opening valve: opener connecting thread 1/2 inch ACME, interface thread 1/2 inch ACME
- Connects R-134a cans with 1/2-inch ACME threads to auto R-134a service hoses with 1/2 inch ACME connections
- T handle for easy fingertip control
- Pump adapter: useful tank pump adapter and vacuum pump adapter for charging and service tools, such as vacuum pump, can tap or oil injector to adapt between R12, R22 system and R134a systems, quick and easy connection and disconnection
- R12 R22 to R134a conversion adapter: these low/ high side retrofits converts 1/4 inch SAE R12 R22 charging port and make it accept the R134a quick disconnect hose
- Fits vehicles 1976 – 1995, excluding some GM cars 91 and up
- Easy to install: connected to the thread for use with the valve, 1 gas valve inside, fitted with a plastic protective cover
Description
Features:
BPV-31 bullet piercing tap valve:
Replaces: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31. Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
R12 R22 to R134a conversion adapter:
Function: converts 1/4 inch SAE R12 R22 charging port to R134a quick disconnect hose.
Application: fits vehicles 1976 – 1995, excluding some GM cars 91 and up.
R134a refrigerant opening valve:
1/2 Inch ACME threads connector is 7/16-20, opener screw is 1/2-16.
“T” handle for easy fingertip control, easy to install.
Specifications:
Quantity: 7 pieces
Color: as pictures shown
Material: stainless steel, plastic
Size:
Adapter 1: female 1/4 inch SAE (7/16 inch – 20 UNF) x 13 mm low side
Adapter 2: female 1/4 inch SAE (7/16 inch – 20 UNF) x 16 mm high side
6014 Vacuum pump adapter: 1/4 male flare x 1/2 female ACME
6015 Vacuum pump adapter: 1/2 male ACME x 1/4 female
Package includes:
1 x Low side port
1 x High side port
1 x R134a refrigerant opening valve
1 x 6014 Refrigerant vacuum pump adapter
1 x 6015 Refrigerant tank vacuum pump adapter
2 x BPV-31 bullet piercing tap
Note:
The mention of any brands and any related model designation above is only for purposes of demonstrating compatibility, not for trademark using.
10. Kegco 2 Faucet Premium Door Mount Kegerator Kit Without Tank 2PSCK-NT
Feature
- 100% STAINLESS STEEL CONTACT: All the metal components that your beer will come in contact with are high quality stainless steel from the keg to your glass. This ensures higher levels of sanitation as stainless steel will not pit or harbor bacteria like brass. Along with the food grade thermoplastic vinyl beer lines, these components ensure that your beer does not pick up any off flavors and tastes the way the brewery intended.
- PERLICK PERL BEER FAUCET: This Perlick beer faucet has a revolutionary ball and floating front seal design that prevents beer from being exposed to air, keeping your handle lever from sticking and mold or bacteria from building up in the faucet body. The heavy-duty 304 stainless steel construction will not pint, tarnish, or taint the flavor of your beer, and it’s polished interior ensures a smoother flow with less agitation and foaming. It is even suitable for wine, kombucha, and coffee!
- DUAL GAUGE REGULATOR: Durably constructed to deliver a consistent flow pour after pour, this Kegco 762-2 Commercial Grade Dual Gauge Regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. Includes a y splitter and two independent shut-off valves for dispensing up to two kegs at the same keg pressure.
- LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our popular 10″ wide door mounted drip tray’s clean design and reliable stainless steel construction make it easy to enjoy delicious draft beer every day – mess-free! Installation is simple, thanks to the two conveniently placed screw holes on the backsplash. When it’s time to clean, the top vent can be removed for easy access. Because this drip tray does not have a drain, you will need to empty it manually.
Description
If you want to ensure your beer tastes the way the brewery intended, there isn’t a better choice than the Kegco premium two faucet door mount kegerator conversion Kit! from the coupler probe to the shank to the faucet, your beer only touches 100 percent stainless steel metal components and food grade thermoplastic vinyl beer lines that will not give off any plastic taste. In addition, the Per lick perl faucet features an innovative design that will not stick, even when dispensing heavier beers. Included in the Kit are a two product, double gauge regulator for dispensing two beers at the same pressure and a wall mount stainless steel drip tray that can easily be removed for cleaning. If you’d like more information on the benefits of this Kit, feel free to give us a call at 1-800-710-9939 and one of our draft beer experts can further Explain the advantage of buying a premium Kit.
Conclusion
By our suggestions above, we hope that you can found Conversion Kit For Refrigerator for you.Please don’t forget to share your experience by comment in this post. Thank you!
